Faults - Causes And Remedies - Soehnle 7801 Bedienungsanleitung

3. FAULTS – CAUSES AND REMEDIES
DISPLAY
Only for the 2750 display unit:
DISPLAY
If the fault cannot be cleared, or other error messages appear, please contact your service
partner.
www.soehnle-professional.com
CAUSES
Underload: only dashes appear at the bottom
of the display field.
Overload: only dashes appear at the top of
the display field. Maximum weighing range is
exceeded.
Scales were not stabilised when switched on.
Taring not possible.
CAUSES
The scales are not reset to "0.0 kg" when
switched on.
REMEDY
Switch the display off and on. The
zero point is reset automatically.
Unload the scales, or switch them off
and on again. The zero point is reset
automatically.
Check the surface under the scales,
and check that the weighing platform
is level. Test the scales with a force
shunt. If the error persists after
readjustment, please contact your
service partner.
Stand still, or stabilise the weight on
the scales.
REMEDY
Unload the scales and restart the
display unit. If the error persists,
please contact your service partner.
13 von 68