KKT KOLBE SuperCERA Benutzerhandbuch Seite 45

Installation
Adjust the bracket position to suit for diferent work surface's thickness.
Cautions
• The ceramic cooker hob must be installed by qualiied personnel or tech-
nicians. We have professionals at your service. Please never conduct the
operation by yourself.
• The ceramic cooker hob shall not be mounted to cooling equipment,
dishwashers and rotary dryers.
• The ceramic cooker hob shall be installed such that better heat radiation
can be ensured to enhance its reliability.
• The wall and induced heating zone above the work surface shall with-
stand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant
to heat.
• A steam cleaner is not to be used.
• This ceramic can be connected only to a supply with system impedance
no more than 0.427 ohm. In case necessary, please consult your supply
authority for system impedance information.
A: Screw
B: Bracket
C: Screw hole
D: Base
!
45