Settings; Display System; Adjust General Settings; Calibration - iCartech AURORA 2 Benutzerhandbuch

Display System

1. Touch the upper left corner to display main menu.
2. Touch [ Settings ].
The settings menu is displayed.
3. Touch [ ] or press the [ menu ] button on the front panel to exit.

Adjust General Settings

1. Touch [ General ], if necessary.
2. Touch to select a setting.
3. Touch on the option to display/select an option.
General settings Options
Language Select on-screen display language.
Europe
America
America4
Radio Area
East Europe
Australia
China
On
Beep
Off

Calibration

Ok
Wallpaper Ok
Gps Path Setup
Key colour Adjust
Calibration
When the touch operation is not sensitive or valid, you should
calibrate the touch screen through calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Start ] to enter.
3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will
move automatically.
4. Aim at center of [ + ], follow the path as shown of the figure, after
steps from 1 to 5, the system will exit calibrating automatically.

Adjust Time Settings

1. Touch [ Time ].
2. Touch an option repeatedly to select.
Time settings Options
Year/
Date
Month/Day
Time Mode 12H/24H
Time Touch [
Desk Timer Touch to select [ Simulate Timer] or [ Numeral Timer ].
Time Zone Touch to select the time zone you desire.
Power Off Time On/Off

Settings

Description
Touch [ ] or [ ] to set year, month and day.
Touch [12H] or [24H] to switch time mode.
] or [ ] to set hour and minute.
Touch to select whether the time displays after power off.
EN-22
Description
Select one that matches your location.
Turn on the beep sound. Each time you press a button,
the unit beeps.
Turn off the beep sound.
Calibrate the touch screen.
You can select a wall paper.
You can select the color of the key.