Listen To Other Devices; Reset; Replace A Fuse; Tv(Optional) - iCartech Aurora G7 Benutzerhandbuch

Listen to Other Devices

You can connect an external audio/video
device to the unit.
1. Connect the external device with the
supplied AV cable.
2. Touch the upper left corner to display
the main menu.
3. Touch [AV-IN 2] = Front input
[AV-IN 1] = Rear input

Reset

When the unit hangs up, you can reset it.
Press [ RESET ] with a ball-point pen or
similar tool.
Reset
Tip
When the unit has been reset, all the
settings will return
to default settings.

Replace a Fuse

If there is no power, the fuse may be
damaged and need to be replaced.
1. Take out the unit from dashbpard.
2. Check all electrical connections.
3. Buy a fuse that matches the amperage
of the damaged fuse.
4. Replace the fuse while the units power
is disconnected.
TV
Touch [DVBT] in the main menu to switch
to TV mode, and touch the center of the
screen to show control buttons.

Other Modes

GPS

1. Touch the upper left corner to display home
menu.
2. Touch [Navi], the navigation menu will
display.
3. Refer to the map manual to operate the
navigation tool.
For the GPS system is independent and
complicated, for more details, please refer
to "Navigation manual" (Not included in this
manual) .
Steering Wheel Control
Programming
1. Touch the upper left corner to display home
menu.
2. Touch [ SWC ], the SWC menu will display.
3. Press each individual steering wheel control
button for each corresponding function.
4. Once the final steering wheel control button
is programmed, the functions are saved and
the programming will end.
5. Touch [ Reset ] to reset the programming.
EN-27