Bluetooth Mode; Pair The Bluetooth-Enabled Devices; Disconnect Bluetooth Device; Make A Call - iCartech Aurora G7 Benutzerhandbuch

You can make or receive phone calls with
Bluetooth-enabled phones through the
unit. You can also listen to music from a
Bluetooth-enabled device.

Pair the Bluetooth-enabled Devices

To connect your Bluetooth device to the
unit, you need to pair the device to the unit.
Pairing needs only to be done once. You can
pair up to five devices. You also can search
for Bluetooth devices by mobile phone.
1. Turn on the Bluetooth function on the
device.
2. Touch [ + ] to search for Bluetooth device
with the device.
3. Select the Bluetooth device ID in the
pairing list.
4. Touch [ Link ].
5. Enter default password "0000".
Note:
• The operational range between this unit
and a Bluetooth device is approximately 5
meters .
• Before you connect a Bluetooth device
to this unit, familiarize yourself with the
Bluetooth capabilities of the device.
• Compatibility with all Bluetooth device is
not guaranteed.
• Any obstacle between this unit and
a B l u e t o o t h d e v i c e c a n r e d u c e t h e
operational range.
• Keep this unit away from any other
e l e c t r o n i c d e v i c e t h a t m a y c a u s e
interference.

Bluetooth Mode

xxxxx
xxxxx
EN-18

Disconnect Bluetooth Device

To disconnect one device, touch [
Note:
• The device will also be disconnected
when the device is moved beyond the
operational range.
• If you want to reconnect the device to the
unit, place it within the operational range.
• If you do not want to reconnect the device
to the unit automatically, touch [
set [ Auto Connect ] to [ Off ].
For details, see the "Adjust Bluetooth
Settings" section.

Make a Call

1. Select Bluetooth function in the home
menu.
2. Pair the phone with the unit.
3. Search for phone number from the
following list:
[ ]: Phone Book
[ ]: Call Log
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly.

Answer an Incoming Call

By default, all incoming calls are received
automaticaly.
1. If there is an incoming call, the screen will
appear "Incoming".
] .
], then