Basic Operations; Parking Brake Inhibit; Mute; Power On / Off - iCartech Aurora G7 Benutzerhandbuch

Parking Brake Inhibit

• When the "BRAKE" cable is connected to
the brake switch, the display on the TFT
monitor will display video only when the
vehicle is applied.
• Parking brake function is overridden when
the video source is set to REVERSE.
• When the parking brake inhibit is active,
the front monitor displays "WARNING Do
not watch wideo while driving!", preventing
the driver from watching content while
driving. Rear video screens are not
affected.

Mute

Press [ VOL/MUTE ] knob or the [ MUTE ]
button on remote control to mute the volume
from the unit. Press again to restore the
volume. [ ] is displayed on the LCD.
Adjusting the volume or using any of the
audio setup features cancels the mute
function.

Power On / Off

Press the [ /NAV ] button on the unit (or
the [ POWER ] button on the remote control)
to turn the unit on. The current mode status
appears in the LCD.
Press and hold the [
power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function
selection. The Beep tone can be disabled
through the Setup menu.

Basic Operations

/NAV ] button to
EN-8

Playing Source Selection

Press the [ SRC ] button to change between
available playing sources. The playing mode
is displayed on the screen.
2 1
3
3 4
1. Date and Time display. Double click to
switch to Clock mode.
2. Function icons
3. 1/2 or 2/2: Touch this page button to view
the first or second page of on-screen
buttons. You also can drag left or right on
the blank area to switch the pages.
4. Touch repeatedly to change wall papers.
5. Touch for quick access to Equalizer level
settings.

Volume Adjustment

To increase or decrease the volume level,
turn the [ VOL/MUTE ] knob on the front
panel or press the [ VOL+ ] / [ VOL ] button
on the remote control. The volume ranges
from "0"to "39". The LCD or TFT screen
displays the volume level for 3 seconds.

EQ Menu

The Audio Control feature allows you to
easily adjust your audio system to meet the
acoustical characteristics of your vehicle,
which vary depending on the type of vehicle
and its measurements. Proper setting of the
Fader and Balance boosts the effects of the
cabin equalizer.
5
3