Electric Connection - BOMANN EHBC 547 IX Bedienungsanleitung

Installing the hob
• Check the hob sealing for any damage and for correct positioning on the hob.
• Place the hob with the cables first into the prepared cutout of the worktop.
• Attach the hob to the worktop bottom using the four brackets and screws provided. Insert the screws into the four holes on the bottom of the hob
and tighten them.
• Position and adjust the brackets depending on the thickness of the worktop.
Installing the oven
• Setup the cabinet base for the installation of the stove referring to the dimensions in "Fig. 1".
• Connect to the mains referring to "Electric connection".
• Insert the oven partway into the previously prepared cabinet base and connect to the hob referring to the chapter "Connecting the hob".
• Then push the oven completely into the cabinet. Make sure not to impede (bend, squeeze, or twist) the cables.
• Attach or secure the oven to the respective fixtures using the two screws. Opening the oven door will uncover the designated mounting holes on
the left and right of the frame.

electric connection

WARNING:
• Have the device connected to the mains only by an authorized expert. The installation must follow the applicable standards and regulations.
• Connecting the device to a normal wall socket or using multiple sockets or extension cables is not permitted.
Lufteinlass
screw
bracket
base
screw
bracket
base
screw hole
screw hole
HOB
TABLE
screw
bracket
base
screw
bracket
BRACKET
base
screw hole
screw hole
mini 760 mm
Luftaustritt
mini 50 mm
mini 5 mm
mini 20 mm
HOB
BRACKET
HOB
BRACKET
Fig. 3
HOB
TABLE
BRACKET
TABLE
21 21