Samsung HT-F5500 Handbuch Seite 15

HT-F5530
Front x 2 Stand x 2
HT-F5550
Front/Surround x 4
Installing the Speakers on the Tallboy Stand
* HT-F5530 only - Front Speakers
* HT-F5550 only - Front/Surround Speakers
1. Turn the Stand Base upside-down and connect it to the
Stand.
2. Use the driver to combine the screws on the 3 marked holes.
3. Straighten a supplied speaker wire to the gravity direction
and put in the hole on the centre of Stand Base.
4. Connect the upper Speaker to the assembled Stand.
5. Insert a screw clockwise into the hole on the rear of the
speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Screw (5 20) 8
X X
Stand Base x 2
Screw (5 20)
X
Stand x 4 Stand Base x 4
Centre
Surround x 2 Speaker Cable x 6
16
X
Centre
Speaker Cable x 6
Stand Base
1
Stand
3
5
Subwoofer
Subwoofer
2
4
Speaker
Stand
6
15
|
English