Dmx-Mode; Dmx Protocol - EuroLite LED PS-4 HCL Bedienungsanleitung

DMX-Mode

The device has two different DMX channel modes. The Control Board allows you, as described below, to
assign the DMX channel mode.
Addressing
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.
Press the MODE button until the display shows Addr. Press ENTER to confirm.
Select the desired DMX Channel Mode 4CH/10CH and again press ENTER to confirm.
You can now set the desired address via the UP or DOWN buttons. Press ENTER once again to confirm.
Press the MODE button in order to return to the main menu.
Please, be sure that you don't have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain.
If several devices are addressed similarly, they will work synchronically.
Controlling:
After having addressed the LED PS-4 HCL, you may now start operating it via your lighting controller.

DMX protocol

4 channel mode
Channel:
1
Color Presets
2
Strobe
3
Programs via DMX
4
Speed via DMX
Value: Function:
000 - 009 No function
010 - 019 Red
020 - 029 Green
030 - 039 Blue
040 - 049 White
050 - 059 Amber
060 - 069 UV
070 - 079 Red + Green
080 - 089 Red + Blue
090 - 099 Red + White
100 - 109 Red + Amber
110 - 119 Red + UV
120 - 129 Green + Blue
130 - 139 Green + White
140 - 149 Green + Amber
150 - 159 Green + UV
160 - 169 Blue + White
170 - 179 Blue + Amber
180 - 189 Blue + UV
190 - 199 White + Amber
200 - 209 White + UV
210 - 219 Amber + UV
220 - 229 Red + Green + Blue
230 - 239 Red + Blue + Amber
240 - 249 Green + White + UV
250 - 255 Red + Green + Blue + White + Amber + UV
000 - 009 No function
010 - 255 Strobe with increasing speed
000 - 009 No function
010 - 199 Auto mode via DMX
200 - 255 Sound mode via DMX
000 - 255 Increasing speed in Auto /Sound modes via DMX
25/28 00093702.DOC, Version 1.1