Noxon A110+ Bedienungsanleitung Seite 12

NOXON A110+
Setup
Once your A110+ has been activated initially, follow these steps to link it to your net-
work for the first time:
You are greeted by the setup wizard, which asks politely if you want to start it up.
Use the navigation buttons to select a language for the menu and confirm – as in all
other menus – the selection by pressing the navigation buttons on the remote. Then,
enter the time format (12/24-hour).
However, we recommend that you set the date and time immediately (Day, Month,
Year,Time), as well as the WLAN region you are located in.
Once you have done so, all that remains to be done is to connect to the network. Don't
worry, even this should not be complicated – the network wizard will give you all the
help you need.
We'll explain the ins and outs of this in the detailed manual later on. For now, we offer
just a brief overview (after all, you are still in the „Overview" chapter), as we do not want
to bore anybody.
The setup wizard gives you the ability to choose between the cable connection and the
wireless WLAN port. If you prefer the cable version, select [Wired].
The setup wizard connects to your router automatically and that's it – you're in! Howe-
ver, if the A110+ is integrated via WLAN, please select your WLAN network on the
display. After selecting the desired network, you then have to enter the password to
connect to the WLAN.
Navigate through the selection in the usual way using the navigation buttons, OK and
Back button.
When you have finished entering the key, confirm with OK. You likewise reach this field
via the navigation dial.
There, you're finished already! Just press the OK button again to go to the main
menu – and use your NOXON A110+ to plunge into the wonderful world of Internet
radio.
12