Kathrein CAS 80ws Handbuch Seite 20

Dimensions in mm
Warranty conditions for the antenna corrosion resistance
Important instructions relating to the warranty conditions for
the corrosion resistance of Kathrein offset parabolic antennas:
● The antenna must be assembled and mounted professionally,
following the steps described in the enclosed instruction sheet
● The antenna must not be modified (e.g. by drilling)
● The antenna must not be damaged mechanically (e.g. deformation, deep or
extensive damage, or abrasion of the powder coating and surface coating)
● The antenna must not be damaged due to exposure to chemicals
(e.g. solvents, lacquers, detergents or the like)
● Only genuine Kathrein accessories may be used for the antenna
These warranty conditions are effective from the date of purchase.
Only the original sales slip is acceptable as proof of purchase for warranty claims.
Furthermore, corrosion resistance is not warranted for the consequences of force majeure, e.g. lightning strike, or if the antenna is
used in regions where frequently occurring, abrasive weather conditions may wear off the protective coating within a short period of
time (e.g. sandstorms).
Electronic equipment is not household waste in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT
AND THE COUNCIL dated 27
At the end of its service life, take this unit for disposal to an appropriate official collection point.
www.kathrein.com | sat@kathrein.de
KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, Germany, Phone +49 8031 184-0, Fax +49 8031 184-52360
January 2003 on used electrical and electronic equipment, it must be disposed of properly.
th
936.3635/c/VMPT/0815/GB | Subject to change.