Initial Installation; Dish Setup -Preparation - Xoro HRS 8525 Bedienungsanleitung

Dish Setup –preparation
Preparation:
You will have to be informed of following points to make a successful channel scanning.
•
Towards which Satellite does your antenna orient?
•
If you have more than one antenna or one antenna with more than one LNB, you will have to
know which type of switch (Toneburst or DISEqC) is employed and to which port is each
Antenna LNB connected.
•
For a Unicable/SCR EN50494, you will have to know which IF-Channel is available and its
corresponding Frequency.
Please ask the installer, if any of the parameter is not known. If you live in a rental house or
apartment, please ask the renter.
Example:
The most satellite antenna orient satellite ASTRAS 19.2° and have a "universal" or "Digital" LNB. We
recommend the pre programmed list in the case.
If you would not like to use the pre programmed list, the common setup for ASTRA 19.2° is as
following:
Satellite:
LNB Type:
LNB voltage:
22KHz:
Tonebust:
DiSEqC 1.0/1.1:
Motor:

Initial Installation

019.2E Astra 1H.
09750/10/600
13/18V
AUTO
None
None
None
HRS 8525
ENG 17