Sony KE-V42A10E WEGA Bedienungsanleitung Seite 33

Option Description
Audio Filter Improves the sound for individual channels in the case of distortion
in mono broadcasts. Sometimes a non-standard broadcast signal
can cause sound distortion or intermittent sound muting when
watching mono programmes.
1
2
3
Note
You cannot receive stereo or dual sound when "Low" or "High" is
selected.
Skip
Skips unused channels when you press PROG +/- to select
channels. (You can still select a skipped channel using the number
buttons.)
1
2
3
To restore a skipped channel, select "No" in step 1.
Decoder Views and records the scrambled channel selected when using a
decoder connected to the scart connector
directly or via a VCR.
Note
Depending on the country/region selected for "Country" (page 29), this
option may not be available.
1
2
3
To cancel this function afterwards, select "Off" in step 1.
Press M/m to select "Low" or "High", then press OK.
If you do not experience any sound distortion, we recommend
that you leave this option set to the factory setting "Off".
Press m to select "Confirm", then press OK.
Press m to select "OK", then press OK.
Press M/m to select "Yes", then press OK.
Press m to select "Confirm", then press OK.
Press m to select "OK", then press OK.
Press M/m to select "On", then press OK.
Press m to select "Confirm", then press OK.
Press m to select "OK", then press OK.
/ 2 either
33
GB