7. "Setup Type":
If you plan to use multiple monitors, please choose this box. (See "Setting up the faytech
Touch software".)
8."Choose Destination Location": Accept the default destination or choose your own then
press "Next".
9. "Select Program Folder": Give the program a name or use the default setting and press
"Next".
10."Setup Status":
The installation will be started automatically with the selected settings.
11.The installation is successfully completed when the following window appears:
If the USB controller icon is not showing, please disconnect the USB cable from your PC and
connect it again. For more help, Please go to the "Troubleshooting" section.
47