Clatronic CTV 789 Bedienungsanleitung Seite 63

05_CTV789_GB 63
NOTE:
• If you would like to interrupt the procedure, press the PBC/SCAN
(Fig. 2/19) button and acknowledge the confi rmation prompt with the
ENTER button (Fig. 2/7).
• By pressing the PBC/SCAN button (Fig. 2/19) you can also activate the
automatic channel search.
Manual Scan
NOTE:
In this type of search it is necessary to know the frequency of the channel
you are searching for. This can be obtained either on the Internet or directly
from the respective channel provider.
Select this type of scan in order to specifi cally search a certain channel or a
certain frequency for programmes.
1. Select the „Start" command.
2. Confi rm the confi rmation prompt shown with the ENTER button (Fig.2/7).
3. The manual search window opens. Use the numerical buttons (Fig. 2/3) to
enter the desired frequency and select the „SCAN" command. In the frequen-
cy range that has been entered a search is carried out for channels that can
be received.
NOTE:
If you would like to interrupt the procedure, press the PBC/SCAN button
(Fig. 2/19).
Setting the Channel
Select the „Start" command. The channel setting menu appears. Use the cursor
buttons (Fig. 2/8) to select the channel that you would like to modify.
• Favourite: Press the /FAV button (Fig. 2/28) to include the currently
selected channel in the favourites list.
• Delete: Press the REPEAT/DEL button (Fig. 2/11) to jump over the currently
selected channel when switching over.
• Protected: Press the /PROT button (Fig. 2/27) to protect the currently se-
lected channel. You will then be asked to enter the password. If you now want
to select the channel, you will be asked once more to enter the password.
To leave the channel setting menu, select the „EXIT" command and confi rm with
the ENTER button (Fig. 2/7).
NOTE:
The password is identical to the one you entered in the menu „Password
Setup Page/Password".
63
26.03.2008, 15:06:19 Uhr