Operation; Specifications; Warranty And Service - Classe Audio Omega Mono Bedienungsanleitung

OPERATION

This section describes the operation of the Omega
Monaural Power Amplifier.
Turning on AC power
The Omega Monaural Power Amplifier is turned on
by means of a power switch located on the left side
of the unit. Do not turn the AC power on until all
connections have been made. When AC power is
applied, the Omega symbol on the front of your
Omega Monaural Power Amplifier will FLASH in
blue for 10 seconds, which indicates a normal
initialization. When the Omega symbol switches to
a solid blue indicator your Omega Monaural Power
Amplifier is in normal operational mode.
Protection mode
The protection circuitry in the Omega Monaural
Power Amplifier is a completely new design by
Classé Audio. This unique design utilizes current
sensors for all internal power supplies. This new
arrangement removes fuses from the Mosfet pre-
driver stage and the result is a new level of
uncompromised sonic performance. The Omega
Monaural Power Amplifier also has a protection
circuit designed to detect unusual distortion and DC
content at the amplifiers output.
Protection mode continued
When the Omega Monaural Power Amplifiers
protection circuitry is triggered the unit will enter
protection mode. The Omega LED indicator on the
amplifier front panel will FLASH red. Power OFF the
amplifier by unplugging the unit. Please note that
once your Omega Monaural Power Amplifier enters
protection mode the Power Switch will not
function. Verify all connections and restart your
amplifier. If the amplifier re-enters protection mode
immediately unplug it and contact your dealer for
assistance.
CE CERTIFICATION
As of July 18, 1996, Classé Audio has been
granted:
Certificate Number: C401CLA1.MGS
This indicates CE approval for all models of the
Classé product line.
This means that your Classé product has been
subjected to the most rigorous manufacturing and
safety tests in the world, and has proven to meet or
exceed all European Community CE requirements.

WARRANTY AND SERVICE

For warranty service, contact your Classé dealer or
Classé Audio directly at:
Classé Audio
5070 Francois-Cusson
Lachine, Québec
Canada H8T 1B3
Telephone: +1 514 636 6384
Fax: +1 514 636 1428
Email: cservice classeaudio.com
@
Web site: http://www.classeaudio.com

SPECIFICATIONS

Main Unit Dimensions
Width: 11-12" 43.2cm
Height: 19-1/2" 49.5cm
Depth: 23-3/4" 60.3cm
Weight: 87.3kg 192lbs
Shipping Box Dimensions
Width: 17"
Height: 24-1/2" 62.2cm
Depth: 29-1/2" 74.9cm
Weight: 101.8kg 224lbs
Frequency Response 20Hz to 20Khz
+/- 0.1dB
Sensitivity 2.25 volts for rated
output
Input Impedance 100 Kohms
Output Impedance 0.05 ohms
Gain 29 dB
S/N Ratio 135 dBR
THD+N 0.003%
Rated Output 500 Watts
1000 Watts
2000 Watts
3
43.2cm
8Ohms
@
4Ohms
@
2Ohms
@