Operation; Voltage Adjustment; Overheating Protection; Cleaning And Maintenance - Ideen Welt HD 1209 Bedienungsanleitung

OPERATION

1. Attach the styling attachment to the air outlet. This concentrates the airflow and your hair can be
dried more quickly.
2. Connect the plug to an appropriate outlet. Heed correct power requirements.
3. Switch the On/Off switch 0/1/2 to the desired position.
0 off
1 weak power
2 strong power
4. Always hold the travel hairdryer by the foldable handle.
5. To turn off the unit, switch the On/Off switch 0/1/2 to position 0.
6. Disconnect the plug after use and let the hairdryer cool down.
7. The hairdryer can be stored by hanging it on a hook using the suspension eye.

VOLTAGE ADJUSTMENT

Use a small screwdriver to turn the small arrow in the voltage switch to either 230V~ or 115V~,
depending on the local mains voltage.

OVERHEATING PROTECTION

For your safety, the travel hairdryer turns off automatically in case of overheating. You have to reset the
overheating protection, otherwise the device will not work. In this case:
1. Switch the On/Off switch 0/1/2 to position 0.
2. Unplug the unit from the power outlet to reset the overheating protection.
3. Let the hairdryer cool down before plug in and turning it on again.
4. Make sure that neither the air inlet nor outlet are blocked.
5. If the hairdryer still does not work, unplug it immediately and have it examined by an expert.

CLEANING AND MAINTENANCE

Use a damp rag to clean the housing. Take care that no water enters the openings. Always rub the unit
dry after cleaning.
Free the air inlet regularly from dust, hair, lint, etc.
HD1209_A6_150923.indb 17
Caution! Always unplug the unit and let it cool down before cleaning.
Attention! Do not use alcohol, acetone, benzene, scouring cleaning agents, etc., to clean
the synthetic parts of the device. Do not use hard brushes or metallic objects.
17
23/9/15 5:46 PM