Heatapp! Radio Modules - EBV heatapp! gateway Installationsanleitung

3.4

heatapp! radio modules

The heatapp! gateway must be fully set up in accordance with section
3.3.3 "Initial operation / initial configuration" and the LED on the side
must be a steady GREEN. Please refer to section 5.2 "LEDs heatapp!
gateway" to determine the meaning of other conditions and for
troubleshooting instructions.
If not already done, connect the heatapp! USB-LAN adapter from the
installation kit with the heatapp! gateway and the PC / laptop (see
section 3.3.3 "Initial operation / initial configuration").
Shortly thereafter the heatapp! gateway menu is displayed in the
browser window of your PC. If the menu does not display automatically,
enter the address
1. Login using the password "gateway" or your changed password.
2. Register all the radio modules with the heatapp! gateway
according to the following descriptions.
3. After setting up all the radio modules, you can remove the heatapp!
USB-LAN adapter.
22 - EN
http://10.0.0.1 in the address line of the browser.