Schema Of Configuration - Wisi STREAMLINE OT serie Startanleitung

Assign IP address
IP Adresse unknown
- Assign a temporär IP-address to MAC address (refer to type lable).
- Fig 4; Buttom 5. Select menue „Assign IP Address".
- Insert MAC-address 12digit (without hyphen) and IP-address. (Fig. 5)
- Change IP-address. Select IP menue (Fig 4/5) and insert new IP address. (Fig 5)
Connect to OT Remux
- Fig. 4; Button 3 "Connect to OT Remux".
- Click on IP address. Connection establishment begins.
- Select language
- Fig. 4; Button 6 "Program Settings – General". Select English / German / Spanish
- Accept and save with OK.
Graphical interface – OT configuration (example)
Displays the graphical interface of the customer-specific OT configuration. For example:
- Front end (input module installation slot 1-6)
- CAM modules 1-4
- QAM modules
- The arrows show the direction in which the signal flows and depend on the configuration.
The multiplexer inputs and outputs are marked MPX.
Change IP address
GB
Fig. 5
Fig. 6
- 33 -