VOLTCRAFT PB-17 Bedienungsanleitung Seite 4

• N ext, connect the micro USB plug of the USB Y-cable to the micro USB socket of the power
bank.
Important!
A lways connect both USB A plugs of the included USB Y-cable to your PC or a USB
hubwith its own power supply first and only then connect the micro USB plug to the
corresponding socket of the power bank.
• W hilst charging, the LEDs flash like a chaser. When charging is complete, all 4 LEDs will
stay on constantly.
• T he charging time depends on the status of the battery and can last for several hours (see
chapter "Technical data" for charging time of a fully discharged battery).
• O nce the built-in rechargeable battery of the power bank is fully charged, disconnect the
micro USB connector from the power bank. The power bank is now ready to use.
d) Charging the mobile device
• F irst, disconnect the power bank from the charging cable, then unplug the micro USB con-
nector from the power bank.
I t is not possible to use the charging ports and charge the power bank simultaneously.
• T he power bank has two charging ports; each one can charge a suitable mobile device
(e.g. smartphone).
O ne of the charging port supplies a charging current of max. 1 A, the other charging
port supplies a charging current of max. 2 A. Take note of the label next to each charg-
ing port.
You can use both charging ports at the same time.
C onnect the appropriate USB A socket using a suitable cable to your mobile device/ smart-
phone.
• P ress the button " " briefly to switch on the power bank. The 4 LEDs show the actual
charge level of the built-in rechargeable battery (1 LED = 25%, 2 LEDs = 50%, 3 LEDs =
75%, 4 LEDs = 100%). A single flashing LED indicates that the charge level is below 25%.
• M onitor the charging process. Once the mobile device/ smartphone is fully charged (or the
rechargeable battery of the power bank is empty), the power bank will turn off.
T ablet computers usually come with a very large battery installed. That is why it is often
not possible to fully charge the rechargeable battery of your tablet computer with the
power bank.
• D isconnect the cable connection between your mobile device/ smartphone and the power
bank by unplugging the USB connector of the cable from the USB-A port on the power bank
to terminate the charging process.
T he power bank turns off automatically after a few seconds, and the blue LEDs of the bat-
tery status indicator go dark.
e) using the torch function
• H old down the key " " for about 2 seconds to switch the white LED on or off.
T he battery indicator's blue LEDs will be activated at the same time, see a) above.
• W hen the white LED is lit, you can toggle between continuous light and the SOS flashing
function by pressing button " ").
mAintenAnCe AnD CLeAninG
The product does not require any maintenance and should never be disassembled for any
reason. The rechargeable battery is permanently installed and cannot be replaced.
Clean the product carefully, e.g. with a soft, clean cloth. Dust can be easily removed with a
soft, clean brush and a vacuum cleaner.
Never use aggressive cleaning agents or chemicals for cleaning; not only can these lead to
discolouration; they can also damage the product.
DisPosAL
E lectronic devices are recyclable material and do not belong in the household
waste.
P lease dispose of the device when it is no longer in use, in accordance with current
statutory requirements.
teChniCAL DAtA
Charging input ......................................1x micro USB port
Input voltage/ current . ...........................5 V/DC, max. 1 A
Charging output . ...................................2x USB port of type A
Output voltage/ current . .......................charging output #1: 5 V/DC, max. 1 A
Internal rechargeable battery . ...............LiIon, 3.7 V, 10400 mAh
Charging time ......................................approx. 15 h when battery is empty
Ambient conditions ............................... T emperature -20 °C to +60 °C, air humidity 30% to
Dimensions (W x H x D) .......................109 x 23 x 74 mm
Weight ..................................................227 g
Legal notice
G
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad electronic se.
charging output #2: 5 V/DC, max. 2 A
80% relative, not condensing