Troubleshooting - M-Life ML0674 Bedienungsanleitung

PiN management, etc.)
» Quick Settings: this tab allows for quick settings adjustment. Press Next/Previous to navigate
through the menu and insert changes (APN, SSiD, Security mode)
» connect status: the tile presents connection status, ON/OF slide switch and download/upload
rate and connection time.
» network Settings: select Network settings subpoint in Network settings tile to adjust connection
mode, network selection and APN settings. Select Wi-Fi settings subpoint in Network settings
tile to modify SSID. WPS, Advanced settings and WLAN MAC filter settings.
» connected devices: the tile displays number of connected devices. Click the tile to see more
information on the external devices. You can also change names or block the devices.
» Statistics: displays statistics chart as per user's settings. Press the tile to set the data/time plan .
» Status Information: displays status information on the device, connection, SiM card etc. Press
„Detail information" to see more.
tip: At the bottom of the page, there is a QR code. Scan the code for fast connection with the router's
network, to share or look up the info about the network.

troubLeShootInG

Problem
Forget SSiD or password
External devices can not
connect to Wi-Fi via this
router
Can't turn up the device
Can't detect SiM card
Can't open website after
connected to Wi-Fi
if the device doesn't work
well, try the following
methods
After modifying SSiD name/
password, cannot connect
automatically
Owner's manual
Solution
turn on the device, press and hold reset button for about 3s,
device will restore factory setting
Make sure the external device has a wireless network card;
make sure the entered password is correct
Make sure the battery is fully charged and installed correctly
Make sure the SiM card has been installed correctly
Check if there is any balance left on your SiM card.
• check battery level
• restart the device
• restore factory setting
After modifying SSiD name/ password, the external device will
still try to connect to the previously SSiD name/with previous
password. Please delete the current SSiD name that failed to
connect, and again search for correct SSiD and input correct
password to connect.
- 21 -
EN