M-Life ML0674 Bedienungsanleitung Seite 18

connect to your deVIce
VIa uSb
1. turn on the router.
2. use an uSB cable to connect the router to your device.
3. Your device will automatically detect the router, and display installation window. Carry out
the installation according to system prompts.
4. Establish a Wi-Fi connection: search for available wireless connections on your computer
or other device.
5. When you find the router's SSID in the Wi-Fi list, click "connect" to connect your device to
the internet.
6. Enter the WiFi key when prompted for a security key (default: 88888888).
7. Open browser and enter the iP address http://192.168.0.1 into address bar. then input login
password (default: admin).
Note:
• the device connected through the uSB to the router is not included in the total number of
access users.
• if the system does not support automatic installation, please run DriverSetup.exe program in
My Computer > CD-ROM drive to start software installation.
VIa WI-FI
1. turn on the device, wait for 1~2 minutes till the device initialization is completed.
2. Make sure the SiM card has balance,
3. Establish a Wi-Fi connection: search for available wireless connections on your computer
or other device.
4. When you find the router's SSID in the Wi-Fi list, click "connect" to connect your device to
the internet.
5. Enter the WiFi key when prompted for a security key (default: 88888888).
EN
6. Open browser and enter the iP address http://192.168.0.1 into address bar. then input login
password (default: admin).
VIa WPS FunctIon
this router can be connected via WPS function, only if the device supports WPS feature. to
connect the two device with the use of WPS follow the below instructions:
1. turn on the router as well as your device. turn on Wi-Fi on your device.
2. Press and hold WPS button on the router to activate the function.
3. turn on WPS function on your other device.
4. the screen on your other device will prompt about connection completion.
note: WPS function will automatically shut down after 2 minutes. Please press the WPS button
again to turn on the function once more.
SSId and PaSSWord
the user can obtain the SSiD and password as bellow:
1. via Web: Enter the Web ui: Network Settings > Wi-Fi Settings > SSiD (select display the
password). the SSiD and password will be displayed on the screen.
2. Double click the router WPS button, you can see the information of SSiD and Key on the LCD.
Owner's manual
- 18 -