Pioneer GM-D1004 Bedienungsanleitung Seite 11

Installation
5 Install the amplifier with the use of
supplied tapping screws (4 mm × 18 mm).
2 3
1 Tapping-screws (4 mm × 18 mm)
2 Floor mat or chassis
3 Drill a 2.5 mm diameter hole
Notes
! Do not install the cords in places where they
touch the legs of a person as a disconnection
or short-circuit may result.
! Do not install the amplifier in a place where
water drop may be attached.
1
Section
04
11
En