Philips DL8780 Bedienungsanleitung Seite 18

English
18
Problem
The device does not
perform
measurement/analysis of
body fat.
The device switches off
automatically.
Data transmission failed.
Specifications
Product name.
Dimensions scale.
Net weight.
Display.
Measurement units.
Measurement range.
Graduations.
Accuracy.
Measuring method
Accuracy BIA
Possible cause
You are standing on the
measurement platform
wearing socks or shoes.
The batteries are empty.
Bluetooth® is off.
The Philips HealthSuite
health app is off.
The scale and your mobile
device are more than 5
meters away from each other.
When the profiles were
shown alternately on the
display, you selected the
wrong profile.
You are standing on the
measurement platform
wearing socks or shoes.
Philips body analysis scale with Bluetooth® (DL8780/DL8781).
321x321x25mm.
Approximately 1.98kg (excluding the batteries).
LCD with white LED backlight.
Kilogram / stone / pound.
5kg to 180kg / 0st: 11lb to 28st: 5lb / 11lb to 397lb
0.1kg / 0.2lb.
5-50kg: ±0.3kg; 50-100kg: ±0.4kg; 100-150kg: ±0.5kg.
Bioelectrical Impedance Analysis (BIA) for body fat analysis.
BIA accuracy ±15 ohms in the range of 200 – 1000 ohms.
Solution
Make sure you are barefoot during the
BIA measurement and keep full contact
with the measurement platform. Make
sure your feet are clean and slightly
damp.
Replace all four batteries at the same
time. We advise you to replace batteries
before they are completely empty. Use
4x 1.5V R6 AAA alkaline batteries.
Turn on Bluetooth® on your mobile
device.
Press the icon on your mobile device to
activate the health app.
Place your mobile device closer to the
scale.
Repeat the measurement and confirm
the correct user profile by tapping on the
scale.
Make sure you are barefoot during the
BIA measurement and keep full contact
with the measurement platform. Make
sure your feet are clean and slightly
damp.