Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty And Support - Philips DL8780 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DL8780:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Warranty and support

Troubleshooting
Problem
The display shows ----
and shuts down.
The display shows the
battery low symbol and
switches off after a few
seconds.
The display shows E1.
Unexpected measurement
results .
The display remains blank
when the device is
switched on.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
If you need more information about the app, please visit
www.philips.com/healthprograms
This chapter summarises the most common problems you could encounter
with the device. If you are unable to solve the problem with the information
www.philips.com/support
below, visit
questions or contact the Consumer Care Centre in your country.
Possible cause
Maximum weight limit is
reached. The scale has a
weight limit of 180kg.
The batteries are
almost empty.
Pairing has failed.
Incorrect posture.
The device is placed on a soft
surface such as a carpet or on
an uneven surface.
Your feet are too dry.
There are no batteries in the
device.
The batteries are empty.
for a list of frequently asked
Solution
The scale can accommodate to a
maximum of 180kg. Stop using this
device.
Replace all four batteries at the same
time. We advise you to replace batteries
before they are completely empty. Use
4x 1.5V R6 AAA batteries.
Check if Bluetooth® on your mobile
device is on, the Philips HealthSuite
health app is open and if the scale and
your mobile device are no more than 5
meters away from each other.
Please step on the measurement
platform and stand still. When measuring
barefoot, make sure your feet are clean
and slightly damp.
Place the device on a flat, hard surface
or attach the carpet feet supplied to the
feet of the scale.
Wipe your feet with a damp cloth to
make sure that they are slightly damp
when you take the measurement.
Insert 4x 1.5V R6 AAA batteries (see
'Inserting/removing the batteries').
Replace all four batteries at the same
time with new ones. Use 4x 1.5V R6 AAA
alkaline batteries.
English
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dl8781

Inhaltsverzeichnis