Binding; Helicopter Steering; Flying - zoopa seventy Anleitung

zoopa seventy

Binding

Helicopter Steering

! !
Please!note!that!the!direction!specifications!apply!from!the!"pilot´s!view"!–!that!means!the!commands!are!inverse!when!
the!helicopter!ist!flying!towards!you!

Flying

The total range of the controller is about 10 m, but can be disturbed by sunlight or neon tubes. Avoid flying under the ceiling or against
obstacles – this causes crashes and damages. The helicopter flies optimally at an altitude of 2 m.
» Switch on the controller
» Switch on the helicopter
» Move the gas stick from the very down position to the top and back again
» Helicopter and controller are connected now.
The left stick is allocated to gas and allows to control altitude of the model (ascent/
descent). Use this stick with caution! Only soft actions are needed on the gas stick
once the helicopter has reached an optimal height. If you move the stick backwards
the helicopter will lose height.
The right control stick allows the following movements: forwards and
backwards, as well as right and left turns on the vertical axis. If you push
the stick, the model will move forward and if you pull it, the model will move
backwards.
By moving the stick to the left and right, the helicopter will turn around its
own axis.
12