Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USB SLAVE GAME COMMANDER OPERATING INSTRUCTIONS
The USB Slave Game Commander # 3036001 is acting as a standard joystick and
may also be used for the easy-Sim and other simulators or computer games. In additi-
on to its 8 main functions it features two switch and one proportional channel, allowing
one to comfortably operate all the features in the Aerofly Professional Deluxe (AFPD),
such as retracts, flaps, swiveling nozzles etc. It is connected to the computer via a
standard 1.0 USB connector. A driver is normally not necessary.
Important: You can only use the Slave Game Commander for the Aerofly Profes-
sional Deluxe if you already own the original interface cable or Game Comman-
der. During operation the original interface cable or original Game Comman-
der has to be connected, otherwise the software will not be activated. You also
should use version 1.8.0.25 or higher. Download updates for an older version
are available for free at www.ipacs.de or www.aerofly.com.
The Slave Game Commander is set up in Mode 2 (throttle left). You can move the
throttle function to the right stick by making the changes as described in detail later in
these instructions.
Activating the Slave Game Commander in
Aerofly Professional Deluxe (AFPD)
To be able to use the Salve Game Comman-
der with Aerofly Professional Deluxe, you
need to install it first in the simulator.
1.
Start the program and click on "Cont-
rols" on the main menu. This window "Aircraft
Control Settings" shows the input devices. By
default you will see here "Transmitter USB
Interface/Game Commander". Should the list
contain further input devices you entered wit-
hout using them, please delete them and re-
start the program. Otherwise it may happen
that the Slave Game Commander will not be
recognized correctly. Now click on "New" and
the next window will appear.
4
Werbung
