Hama 00 042558 Bedienungsanleitung Seite 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• DC 5V power adapter
• HDMI™ Splitter main unit
• User's manual
3. Safety Notes
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Children should be supervised to ensure that they do not
play with the device.
• Do not use the product in areas where the use of elec-
tronic devices is not permitted.
• The product is intended for private, non-commercial use only.
• Disconnect the product from the network using the
power button – if this is not available, unplug the power
cord from the socket.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
Warning
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
• Do not open the device or continue to operate it if it
becomes damaged.
4
4. Quick Start Guide
4.1 TV Wall / Multi-Room / Sports Bar Application
• Set the HDMI™ Splitter in Detection Mode A.
• Blue-ray DVD player set to AUTO video (resolution / color
deep) an audio detection.
• Connect all HDTVs to the HDMI™ Splitter; please check
Figure 1 for your reference.
• Connect the power adaptor to the HDMI™ Splitter and
turn on the power switcher.
If the Blu-ray DVD doesn't support auto detection, please:
• Set the output signal of the Blu-ray DVD player to match
with the lower standard HDTV to ensure all HDTVs can
display same images. In case of figure 1, it will be HDTV
2 (4K2K).
• OR set the HDMI™ Splitter in Detection Mode B, and set
the output signal of the Blu-ray DVD player to 1080p/
8-bit. Connect the HDTV 2 (4K2K) to port 1.
3D Application
• Please make sure your Blu-ray player and all the HDTVs
can support the same 3D format.
• Under Mode A, if there is any of HDTVs cannot support
either 3D application or the same 3D format, all oft
he HDTVs will be displayed in 2D. If the supporting 3D
format of the Blu-ray player cannot be compliant with
one or some of the 3D HDTVs, the incompatible 3D TVs
would not be able to correctly show the 3D image.
4.2 Home Theater Application
• Set the HDMI™ Splitter in Detection Mode B.
• Blu-ray DVD player set to AUTO video (resolution / color
deep) and audio detection.
• Connect the Home Theater Receiver, Projector, and HDTV
to the HDMI™ Splitter; please check Figure 2 or Figure
3 for reference.
• Connect the power adaptor to the HDMI™ Splitter and
turn on the power switcher.
• Blu-ray DVDs disc may support different audio format
(PCM; Bit Stream: Dolby, DTS ... etc.), please set the Blu-
ray DVD player to the correct audio format setting or set
it to auto detection. Please follow the user's manual of
your Blu-ray DVD player to change the output setting.
3D Application
• Please be sure your Blu-ray player and all the HDTVs can
suppot the same 3D video format
• Under Mode B, the device connected to output port 1
(TV, projector, amplifier, etc.) will be the primary device
for output standard.
• If the device connected to output port 1 equipped with
3D function, the Blu-ray player also supports 3D, then
3D format will be selected as output format.