Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Caution
Before starting with the installation, please make sure that the pull switch on the
fan is set to the highest speed. Any damage caused to the circuitry of the remote control's
receiver, due to faulty installation, is not covered by the remote control's warranty.
Only operate the unit when completely assembled!
Before installation:
Attention!
CasaFan remote controls may only be installed by a professional electrician under observance
of the German VDE 0100 industrial standard (or the applicable federal and/or state code).
-
The specified voltage on the model tag must correspond with the available mains
voltage. The wiring in the house must be grounded!
-
The mains wiring may not be damaged during installation.
-
Please install the mains wiring in such a way that it cannot be pinched or damaged.
-
Do not employ the remote control unit in humid, wet or explosive environments.
-
The remote control unit must only be used to control ceiling fans
-
Do not use for other purposes!
Electrical diagram
black
brown
blue
blue
brown
ATTENTION! The observance of the instructions on the receiver
unit is mandatory!
Installation
ATTENTION!
Before starting the installation and before accessing the
connection, all current carrying conductors are to be isolated.
12
L (light)
L (motor)
N
N
L
antenna
Werbung
