LD WS1G8 Bedienungsanleitung Seite 11

9 INPUT
3-pin mini XLR input for the supplied microphone
or guitar cable.
10
GAIN SwITCH
Select the appropriate gain setting.
MIC = microphone
0dB = guitar with passive pickup
-10dB = guitar with active pickup
If the audio signal overloads the receiver, switch
the gain to the next lower setting.
11 BELT CLIP
Attach the bodypack to a belt or guitar strap as
shown below.
BODYPACk MINI-XLR PIN ASSIGNMENT
MINI-XLR
2
3 1
Guitar & Bass and other high impendance sources
Headset, lavalier or wind instrument microphone with low sensitivity. 2,2 kOhm
resistor soldered on pin 2 and pin 3 increases gain.
6,3 mm jack
sleeve tip
MINI-XLR
2
R
3 1
2,2k
BODYPACk TRANSMITTER:
9
11
MINI-XLR
2
3 1
Headset, lavalier or wind instrument microphone
10
11