Troubleshooting - Renkforce 95482 Bedienungsanleitung

Slide Show Interval:
Color:
OSD Language:
Reset Setting:
Firmware version:

11. Troubleshooting

If the photo frame cannot read the internal memory, the USB stick, or the memory
card, observe the following points.
• Memory card not inserted correctly (wrong position).
• Make sure you have selected to correct data source.
• The photo is not in JPEG format.
Question
What image, music
and video formats are
supported?
What memory cards
are supported:
Can I connect more than
one data medium at the
same time to the photo
frame?
The display is blank.
There are image interferences. The image file is faulty or of low quality.
Set the time interval between the individual photos of a sli-
deshow. Default setting = 3 seconds.
Set Brightness, Contrast, Saturation, or Hue.
Language of the on-screen display. Default setting = English.
Restore factory settings.
Firmware information.
Answer
Only images: JPEG
SD/MMC/MS memory cards, USB memory
sticks (support for USB 2.0).
Yes, you can connect a memory card
and a USB stick at the same time.
Check the power connection.
31