Screwing On The Base; Using The Device; Main Menu - Renkforce 95482 Bedienungsanleitung

7. Screwing on the base

Upon delivery, the provided base (8) is in the base holder (9) on the back of the photo
frame. Pull the base (8) out of the base holder (9) and screw it into the provided
tapped hole which is also on the back of the device.

8. Using the device

• Connect the circular plug of the mains adapter with the power connection
(5 V/DC, 1A) (7) on the back of the photo frame.
• Plug the mains adapter into a standard household mains socket After a short
initialisation phase, the photo frame displays the start screen "Select Cards".
• Insert a data medium (USB stick or SD/MMC/MS memory card) in the correct posi-
tion into the corresponding socket on the back of the device.
Of course, you can connect a USB stick and a memory card
simultaneously.
• Use buttons "
MMC/SD/MS memory stick) and press the "ENTER" button (1) so confirm your
selection.
Select "Built in" to use the internal 8MB-memory of the photo
frame.

9. Main menu

26
" (3) to select the connected data medium (USB stick or