Intenso MEDIAPERFORMER 8 Bedienungsanleitung Seite 12

3) General Operation
a) Main Menu
After powering on, the Main Menu appears.
In the Main Menu you have the choice between the Different Functions of the Digital Photo
Frame and the Setup Menu. Tap the key
control to select the menu points. By taping the keys ▲, ▼ (arrow keys) on the photo frame or
on the remote control you browse in the respective under-menus. Confirm your selection by
taping the key Play/Pause [ ] on the photo frame or on the remote control.
b) Viewing Photos
Navigate in the Main Menu to the function Photo. It will display the Connected Storage
Devices. Depending on which storage device is connected, you will have the Choice between
SD, MMC and USB. Confirm your selection with the Play/Pause [ ] button.
Choose your desired Folder to reach the Image Preview Menu. Navigate now to a Photo and
confirm with the Play/Pause [ ] button to start the Slideshow from here.
In case you have already started a slide show using the storage medium selected, the digital
photo frame will automatically continue with this slide show. If required, you need to manually
adjust the view of the folders available and the picture preview menu. Please press the Back []
button to leave the slide show and to start the preview menu.
Functions during the slideshow:
- By pressing the Arrow Keys either Left or Right you can jump one picture Back or
Forward.
- Pressing the Play/Pause [ ] button will Stop the Slideshow and display Detailed
Information superimposed on the photo. Press the button again to continue the
Slideshow.
- Keep the Play/Pause [ ] button pressed to open the OSD Menu. Here you may select the
nature of the file copy, switch on or off the background music (if the supported music files
are present in the memorised means), zoom in or turn the photo, set the lighting level,
select transition effects, set the display duration of an image and scale the image
display.
c) Calendar:
Calendar mode gives the possibility of selecting different views. Simply click the Play/Pause
[ ] button on the picture frame or on the remote control.
Hold down the Play/Pause [ ] button to open the OSD Menu. You can therefore set the date
and time, enable and/or disable the timer and/or alarm. Please run seperatlery the settings for
the timer and alarm through the settings menu.
,
(arrow keys) on the photo frame or on the remote
GB - 3