Initial Operation - AGFA AF 8070 Bedienungsanleitung

3 Initial Operation

Packing Contents
Digital photo album
1 Digital photo album
2 Power supply unit
2 Power supply
User Guide (not depicted)
User Guide (not depicted)
AF 8070 Verpackungsinhalt
Packing Contents
If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.
Connecting power supply
Mains Voltage at Setup Location
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
1 Insert the small plug of the power supply unit into the
port behind the flap on the right hand side of the device
Insert the power supply unit into the socket. Do not
turn the device on yet!
Initial Operation
Using storage mediums
Inserting a Memory Card
1 Switch the device off using the on/off switch on the up-
per side.
2 Open the flap on the right hand side of the device.
3 Insert a memory card into the appropriate card slot on
the right hand side of the device. Your photo frame
supports the following memory cards: SD/SDHC/MS/
MMC.
Only use storage media that are compatible with
the device. In order to prevent damage to the
card or the unit, please turn off the power before
removing or inserting the card.
Never pull out the memory card while the device
is accessing it. This could cause data to be dam-
aged or lost.
4 Switch the device on using the on/off switch on the up-
per side. After the start screen is displayed, an overview
of the photos on the memory card appears.
EN
4