Network / Internet - Peaq PBR510 Bedienungsanleitung

41
Connections
ANTENNAS
Connect the FM antenna to the FM ANT jack
on the back of the appliance. Try different
positions of the antenna to figure out the
best reception position.
Connect the AM antenna to the AM ANT
jack on the back of the appliance. Push
the connector button and run the cable into
the opening in the connector. Releasing
the connector button, to lock the cable
in place. The AM antenna can either be
freestanding or mount to a cabinet/wall for
best reception.

NETWORK / INTERNET

To receive services such as BD-Live, connect
an network cable with Internet connection
to the ETHERNET jack on the back of the
appliance.
TV / PROJECTOR
Video connections can be made via the
following outputs:
HDMI
Digital video and audio signals are transfered
via HDMI cable. HDMI is the ideal connection,
as only signals of HDMI inputs 1 and 2 are
emitted here. HDMI inputs cannot be used
when connection via another output.
Y CB/PB CR/PR
Analogue component picture signal via triple
RCA cable. Please observe the different
colours of the connectors.
VIDEO
Analogue picture signal (FBAS) via RCA
cable. Analogue sound is also emitted via L
and R RCA jacks.
ENGLISH