Programmed Play - AEG CDP 4228 Bedienungsanleitung

MODE (1)
During audio CD playback:
Press once = "
edly.
Press twice = "
repeatedly.
Press three times = "RAN" appears in the display. All music tracks will be played ran-
domly.
Press four times = "INTRO" appears in the display. Each music track will be played for
10 seconds.
Press five times = All functions will be canceled and normal playback will resume.
Only for playing CDs in MP3 format:
Press once = "
edly.
Press twice = "
repeatedly.
Press three times = "
CD will be played repeatedly.
Press four times = "RAN" appears in the display. All music tracks will be played ran-
domly.
Press five times = "INTRO" appears in the display. Each music track will be played for
10 seconds.
Press six times = All functions will be canceled and normal playback will resume.
ESP / DIR (9)
If a CD in MP3 format contains folders:
• Repeatedly press the button during playback in order to select the respective folders.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the PROG button (5) during stop mode. "01 P-01" and the notification "PGM"
will appear in the display. Use the / buttons (4/2) to select the desired track and
then press the PROG button again. The display changes to memory slot P-02.
For CDs in MP3 format, there is an additional album selection available in the left top
corner of the display. First use the / buttons to select the album and then press the
PROG button again. Then select the desired track as described above.
" appears in the display. The current track will be played repeat-
ALL" appears in the display. The complete CD will be played
" appears in the display. The current track will be played repeat-
ALL" appears in the display. The complete CD will be played
ALBUM" appears in the display. The current folder of the MP3
English
61