Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
60
Playing CDs/MP3
1. Open the CD compartment by sliding the OPEN button (6) in the direction of the ar-
row.
2. Insert an audio CD with the printed side facing upwards on to the central cone so that
the CD clicks into place and then close the lid of the CD compartment.
3. Press the
PLAY/PAUSE button (8) to switch on the device. The ESP memory will
load. "ESP" appearing in the display indicates the activated ESP function.
4. The CD will play from the first title.
5. In order to remove a CD, press the STOP/POWER OFF button (12). Open the CD
compartment and carefully lift the CD up.
Always keep the CD deck closed.
NOTE:
• If there is no CD, or if a CD has been inserted upside down, the display will show
"
".
• Playback of CDs produced by the user cannot be guaranteed due to the large variety
of software and CD media available.
Description of the CD buttons
PLAY/PAUSE (8)
You can briefly interrupt and resume playback using this button. The elapsed playback
time will be flashing on the display. Pressing again continues playback.
SKIP+/ SKIP- (4/2)
With SKIP+ you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to search through the tracks.
The
SKIP- button can be used as follows:
Press once = This jumps back to the beginning of the current track.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the button is kept pressed down,
the machine starts to search through the tracks.
STOP/POWER OFF (12)
The playback stops.
Werbung
Inhaltsverzeichnis
