Alarm Function - JGC UR-210USB Bedienungsanleitung

ALARM FUNCTION

You can use the alarm function to wake you to an electronic buzzer tone, the radio or your favourite
USB MP3 songs.
First press the ALARM SET button to check the wake-up time setting. Adjust the wake-up time if
necessary. Then press the ALARM ON/OFF button to select the alarm function on/off, the display will
show the "alarm bell" icon to indicate that the alarm function is ON. (F. 2)
Then you can press the STANDBY button to switch the radio to Standby. At the selected wake-up
time, the desired wake-up mode will be turned on. It will continue for one hour and then shut off auto-
matically. To stop the alarm sooner, press the ALARM ON/OFF button once or pressing the
STANDBY button to switch the unit to Standby.
WAKE TO BUZZER
1. Press the MUSIC/BUZZER button to select wake to buzzer, the "buzzer" icon will appear in the
display to indicate that buzzer is selected. (F. 3)
2. Press the BUZZER HIGH/LOW button to select the buzzer sound output level, the display will show
"HI" if the louder buzzer sound is selected. (F. 4)
WAKE TO MUSIC (USB / RADIO)
1. To select wake to radio, press the MUSIC/BUZZER button until the "buzzer" icon disappears in the
display.
2. Press the USB/RADIO to select the Radio function, tune to your desired radio station and adjust the
volume to the level you want to hear when the alarm comes on.
3. To select wake to USB, connect your memory device loaded with your favorite MP3 songs to the
USB port on the front panel, press the USB/RADIO button to select USB and start the MP3
playback. Adjust the volume to the level you want to hear when the alarm comes on.
Automatic Alarm Repeat
The alarm will automatically repeat each day at the selected wake-up time as long as the "alarm bell"
icon appears in the display. To cancel the alarm, press the ALARM ON/OFF button until the icon
disappears.
OPERATION
15
F2
HI