Sleep Function - JGC UR-210USB Bedienungsanleitung

LISTENING TO THE USB (MP3 Playback)
1. When the radio is on, press the USB/RADIO button to select USB function, the display will show
"USB NO DATA". (F. 8)
2. Connect your memory device loaded with your favourite MP3 songs via the USB port located on the
front panel. The "NO DATA" icon will go off.
3. Press the PLAY/PAUSE button, it will begin to playback from the first MP3 track found in the device
and the display will show the USB playback icon. (F. 9)
4. To interrupt playback, press PLAY/PAUSE, the playback icon in the display will flash.
5. To resume playback, press the PLAY/PAUSE button again.
6. To stop playback, press the STOP button.
7. During playback, press the NEXT or the PREVIOUS button to skip forward or back to other MP3
tracks in the memory device. Playback will start at the beginning of the selected track.
Note: In case that your memory device is loaded with MP3 songs but the display keeps on showing
'NO DATA", the format of your USB device might not be compatible with this radio. To listen to the
songs in the device, please use the line-in cable (not supplied), insert one end to the AUX IN socket (at
the back of the radio) and the other end to the line out or the headphone jack of your USB device, the
radio will be automatically switched to the output of your device.

SLEEP FUNCTION

This function allows you to program the radio to switch off itself after a set period of time.
1. To activate the sleep function, press the SLEEP button, the display will show "90" and the "SLEEP"
will appear and flash.
2. Repeatedly press the SLEEP button, the time will change in sequence on every press:
3. When your desired sleep time appears in the display, release the button, the "SLEEP" in the dis-
play will become stable in 2 seconds and the sleep function is ON. When the sleep time counts to
zero, the unit will go off.
4. To put the sleep function off, press the SLEEP button until "SLEEP" in the display goes off.
Note: If the sleep time is in standby, the radio will be switched ON automatically after the sleep func-
tion is on.
OPERATION
17