Specifications - iCES ICRP-211 Bedienungsanleitung

USE THE PROJECTOR
1. Press once the Projector ON / OFF Button to turn on the projector.
2. The projector will project the currect time straightly to a wall or ceiling.
3. Turning the Pojector - Focus Knob to obtain a more clear image of the time
projecting on a wall or ceiling.
4. Press once more the Projector ON / OFF Button to turn off the projector.
BATTERY BACK-UP
Note: This clock radio has a back-up power system to ensure continuous operation of the
clock and alarm in the event of a power failure. The switch from AC to battery power is
automatic. However, under battery power, the clock display will not illuminate even though
the clock maintains the correct time and stores the alarm time in the memory. The system
operates on 3x1.5V "AA" size batteries (not included). We recommend the use of a long
life battery to ensure maximum performance.
CHECKING THE TIME DURING NO SUPPLY OF AC POWER (WITH BACKUP
BATTERIES)
When there is no supply of AC power but the unit is fitted with 3x1.5V "AA" size batteries
(for backup), the display will not show any information. However, you can still check the
current time by pressing once the SNOOZE button and the current tme will be displaying
for a few seconds.
It will also alarm when it reaches the preset alarm time if the unit is fitted with backup
batteries.
ANTENNA
The unit has a flexible wire on the back of the unit and it should be extended to its full length
for best reception white receiving FM radio. For AM, the radio is supplied with a built-in
directional aerial, rotate the unit for the best AM reception.

SPECIFICATIONS

Power Source
Frequency Range
Dimensions
Weight
Weight and dimensions are approximate because we continually strive to improve our
products, specifications may change without prior notice.
: AC230V ~ 50Hz
DC4.5V
clock back-up) (battery not included)
: FM 88-108 MHz
AM 540-1605 kHz
: 141(L) x 131(D) x 98(H) MM
: 0.48 KG
, 3x1.5V "AA" size batteries type (for