Specifications - Soundmaster Scd5350Ro Gebrauchsanleitung

Radio
1. Slide the FUNCTION selector to RADIO
2. Slide the BAND selector to FM STEREO; FM
3. Rotate the TUNING control to find the desired stations
For FM: pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong (very close to a
-
transmitter)
Cassette
1. Select Tape source
2. Press STOP EJECT to open the cassette door
3. Insert a recorded cassette and close the cassette door
4. Press PLAY to start playback
5. To interrupt playback, press PAUSE. To resume, press the key again
By pressing |<< or >>| on the set, fast winding of the tape is possible in both directions#
6.
7. To Stop the tape, press STOP EJECT
Recording from the radio
1. Tune to the desired radio station (see TUNING TO RADIO STATIONS)
2. Press STOP EJECT to open the cassette door
3. Insert a suitable cassette into the cassette deck and close the cassette door.
4. Press RECORD to start recording
5. For brief interruptions, press PAUSE. To resume recording, press PAUSE again.
6. To Stop recording, press STOP EJECT
Maintenance
To ensure quality recording and playback of the tape deck, clean record- and audio head after approx. 50 hours of operation, or on
average once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck. Note: Before
clean the parts must be sure that no power supply is available.
CD Player
1. Adjust the source selector to CD
2. To open the CD door, press the CD door at the edge marked open
3. Insert a CD, CD-R/RW with the printed side facing up and press the CD door gently close
4. Press PLAY/PAUSE on the set to start playback.
5. To pause playback press PLAY/PAUSE, to resume press PLAY/PAUSE again.
6. To stop CD playback, press STOP
Recording from CD
1. Press STOP/EFECT button to open the door, insert a cassette and close it.
2. Press RECORD button and CD PLAY/PAUSE button to start the recording
3. To stop the recording, press STOP/EJECT
CD Repeat
Press 1 x repeat button:
Press 2 x repeat button:
Press 3 x repeat button:
CD Program (max. 20 Title)
In the STOP mode, press |<< or >>| for your desired track
1.
2. When your chosen track number appears, press PROG once to store the track. The display shows prog and prog briefly
followed by your selected track number
3. Repeat steps 1 to 2 to select and store all desired tracks in this way
4. To play your program, press PLAY
5.
Erasing a program: Press STOP button twice

Specifications

FM Frequency: 87.5 – 108 MHz
Power consumption: 15 Watt
AC Power Supply: AC 230V~240V, 50Hz
DC Power Supply: 8 x 1.5V Type UM-2/C
Copyright by Woerlein GmbH, 90556
Current track will be repeat
Complete CD will be repeat
Will be in normal playback mode
Cadolzburg, www.woerlein.com
ENGLISH
ENG 2