Description Of The Control Buttons; Programmed Play; Playing Back Music In Mp3 Format - AEG SR 4358 CD Bedienungsanleitung

Description of the control buttons

NOTE:
Not all the functions may be supported depending on the
playback device.
/ CLOCK (7)
• You can briefly interrupt and resume playback using this
button. The display shows the elapsed playback time
flashing. Pressing again continues playback.
• Press and hold this button during operation to briefly
display the current time.
TUN- / TUN+ (9)
With TUN+ you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The TUN- button can be used as follows:
Press once = This starts the current track again from the
beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the but-
ton is kept pressed down, the machine
starts to search through the tracks.
(10)
The playback is stopped.
MODE (5)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
During the playback of an audio CD:
Press once = the current track is repeated continuously.
The symbol "REP" will flash in the display.
Press twice = the whole CD is played continuously. The
symbol "REP" is lit in the display.
Press three times = RAND appears on the display. All tracks
will be played in random order.
Press four times = all functions are cancelled. The normal
play mode is resumed.
During playback of MP3 music:
Press once = the current track is repeated continuously.
The symbol "REP" will flash in the display.
Press twice = the selected folder is repeated con-
tinuously (REP FOLDER appears in the
display).
Press three times = all music titles are repeated continuously
(the symbol "REP" is lit in the display).
Press four times = RAND appears on the display. All tracks
will be played in random order.
Press five times = all the functions are deactivated. Playback
is continued normally.
PRE-/FOLDER- / PRE+/FOLDER+ (6)
Use the PRE-/FOLDER- / PRE+/FOLDER+ buttons to select
another folder. The music in the selected folder is played
back.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the button (10).
2. Press the MODE/AMS button (5). "P01" (Storage space)
and the notification "PROG" will appear in the display.
Use the TUN- / TUN+ buttons (9) to select the de-
sired track and then press the MODE/AMS button again.
The display changes to memory slot P02.
3. Select the next track with the
and press the MODE/AMS button again. Repeat the
procedure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the
display.
4. Press the /CLOCK button (7). The playback starts.
The notification "PROG" will appear additionally in the
display.
5. Press once the button to stop the playback while retain-
ing the program.
6. To play the programme back again, press the
CLOCK button.
7. To delete the program, press the button twice. The
notification "PROG" will disappear.
The device stops automatically after all programmed titles
have been played. The programmed playback sequence will
be erased.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
English
37
TUN- / TUN+ buttons
/