Description Of The Control Buttons - AEG NSR 4377 Bedienungsanleitung

English
38
38

Description of the Control Buttons

PLAY / PAUSE (17)
• Press briefl y:
You can briefl y interrupt and resume playback using this
button. The notifi cation on the display fl ashes. Pressing
again continues playback.
• Keep pressed:
Select the USB port.
SKIP + (16)
With SKIP + you can jump to the next or previous track
etc. If the button is kept pressed down, the machine starts to
search through the tracks.
SKIP – (15)
The SKIP – button can be used as follows:
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc.
If the button is kept pressed down, the machine starts to
search through the tracks.
STOP (19)
The playback is stopped.
MODE (20)
• In stop mode for programming any order of tracks (see
the section on "Playing Back Programmed Tracks").
• When playing back music to select the replay mode (see
next chapter).
When playing an audio CD:
Press once = (The symbol
track is repeated continuously.
Press twice = (The symbol
CD is played continuously.
Press three times = (RAND appears in the display) All titles
are replayed successively in random
order.
Press four times = All functions are cancelled. The normal
play mode is resumed.
Only for CDs in MP3 format or audio fi le formats which are
playing:
Press once = (The symbol
track is repeated continuously.
Press twice = The selected folder of the MP3 CD is
repeated continuously (
appears in the display).
Press three times = (The symbol
CD is played continuously.
NSR4377CD_MP3_USB_IM
Press four times = (RAND appears in the display) All titles
Press fi ve times
ALBUM (21)
Press the button during playback of an MP3 fi le in order to
select the next folder.
Playing Back Programmed Tracks
This can be used to program any desired sequence of tracks.
1. Press the STOP
2. Press the MODE button. "P 01" (Storage space) and the
notifi cation "PROG" will appear in the display. Use the
SKIP +
track and then press the MODE button again. The display
changes to memory slot P 02.
3. Select the next track with the SKIP +
tons and press the MODE button again. Repeat the
procedure until all the desired tracks are selected.
4. Press the PLAY / PAUSE
The notifi cation "PROG" will appear additionally in the
display.
5. Press once the STOP
while retaining the program.
6. To play the programme back again, press the PLAY /
fl ashes) The current PAUSE
The device stops automatically once the entire sequence of
is lit) The whole
ALL
programmed tracks is completed. The display PROG goes
out and the programmed sequence will be deleted from the
memory.
Deleting a Programmed Sequence
To delete the program, press the STOP
notifi cation "PROG" will disappear.
AUX-IN Jack
fl ashes) The current
1. Connect a 3.5 mm stereo cable to an external audio
source. If required, use a suitable adapter (not included).
2. Set the function selector switch (13) to the "CD / MP3 / USB"
ALBUM
position.
3. Insert the other end of the cable into the AUX-IN jack
is lit) The whole
ALL
(Back Side) on the unit.
4. Start the playback of your audio source. Listen to the
sound playback via the speaker.
are replayed successively in random
order.
= The function is deactivated and the CD
is played in the normal mode.
button.
/ SKIP – buttons to select the desired
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" fl ashes in the
display.
button. The playback starts.
button to stop the playback
button.
/ SKIP – but-
button twice. The
07.06.16