Listening To The Radio; Playing Cds; Programmed Play - AEG SR 4345 CD Bedienungsanleitung

4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.

Listening to the Radio

1. Turn the function selector switch (5) to the FM.
2. Tune in the desired station with the station adjustment
knob TUNING (6).
3. In case of poor reception, try to improve the reception by
changing the position or winding, respectively unwinding
the dipole antenna.

Playing CDs

This is how you play a CD
1. Turn the function selector switch (5) to the "CD" position.
2. Open the CD tray (3) by pushing the PUSH/OPEN button
(7).
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
4. The display shows "– –"and then the number of titles.
Press the button (12) to play the CD. The current song
and the symbol " " are shown in the display.
Important NOTE: Playing of CDs and CDRs in
MP3 format!
The unit cannot play MP3s. The CD will rotate, but the
sound cannot be reproduced.
5. In order to remove a CD, please press the button (11),
open the CD compartment and lift the CD out carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is incorrectly inserted - or no disc has been
inserted - the symbol "– –" and the word "NO" appear
in the display.
• Please observe:
Many burning methods exist, as well as quality differ-
ences with CDs and burned CDs.
In addition, the music industry does not observe fixed
standards (copy protection).
Because of this, in rare cases there may be problems
with playback of CDs. This is not a malfunction of the
device.
Description of the CD buttons
(12)
You can briely interrupt and resume playback using this but-
ton. The symbol " " will blink in the display. Pressing again
continues playback.
/ (10/13)
When audio CD is playing:
With you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The button can be used as follows:
Press once = This starts the current track again from the
beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the but-
ton is kept pressed down, the machine
starts to search through the tracks.
(11)
The CD stops.
REP (9)
When audio CD is playing:
Press once = the current track is repeated continuously.
REP 1 will be shown in the display.
Press twice = the whole CD is played continuously. REP
ALL will be shown in the display.
Press three times = all functions are cancelled. The normal
play mode is resumed.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the button (11).
2. Press the PROG button (14). PROG. 01 (storage space)
blinks in the display. Use / button (10/13) to select the
desired track and then press the PROG button again. The
display changes to memory slot 02.
3. Select the next track with the / button and press the
PROG button again. Repeat the procedure until all the
desired tracks are selected.
NOTE:
If the storage capacity of the titles to be programmed
has been reached, the programmed titles will be shown
in sequence.
4. Press the button (12). The playback starts. The display
shows the first selected title number. The display PROG.
lights up.
English
27