Identifying The Parts (Main Unit) - Teac SR-80i Bedienungsanleitung

A
B
Top
¤
A Standby/On ( )
Press this button to turn the unit on and put it into
standby.
ECO POWER mode
To save energy, the unit turns to the ECO POWER
mode in the following cases:
If no iPod or iPhone is inserted in the dock, and
three minutes have passed since power has
been set to standby
If no iPod or iPhone is inserted in the dock
and no operation has been conducted for
18 minutes when the power is ON and the
source is set to "iPod" or "USB"
If no iPod or iPhone is inserted in the dock,
pressing the Standby/On (¤) button for more
than 3 seconds when the power is in standby
When the unit is in ECO POWER mode, ECO POWER
indicator lights and nothing appears on the display.
In ECO POWER mode, press the Standby/On (¤)
button to turn the unit on.
B Play/Pause ( y / 9 )
When the source is "iPod" or "USB", press this button to
start or pause playback.
C Stop ( 8 )
When the source is "USB", press this button to stop
playback.

Identifying the Parts (Main Unit)

C
F
J
D
G
I
H
J
D FUNCTION
Press this button to select a source.
E VOLUME ( – / + )
Press these buttons to adjust the volume level.
iPod/iPhone dock
F
Insert an iPod/iPhone into this dock.
Before connecting the iPod/iPhone to the dock set
the iPod/iPhone "power on". If the iPod/iPhone is
connected to the dock with the "power off" the
playback may not start correctly.
To prevent dust from accumulating on the dock
connector, set the supplied dock cover when it is not
being used.
G Display
Displays the clock, current source, etc.
H Remote sensor
When operating the remote control unit, point it
towards here.
ECO POWER indicator
I
Lights when the unit is in ECO POWER mode.
J Speakers (Stereo)
E
9