Sleep Timer; Wake Up Timer; Setting The Wake Up Timer - Teac SR-80i Bedienungsanleitung

Sleep Timer

You can set the sleep timer so that the unit turns itself off
after a specified amount of time.
Each time the SLEEP button is pressed, the time is
changed at 15 minute intervals.
The unit will automatically will be turned off when the
time elapses.
90 min
75 min
60 min
45 min
30 min
15 min
OFF
o During the sleep timer is activated, the display is
dimmed and "S" lights.
If you want to check the remaining time, press the
SLEEP button once. The remaining time is displayed for
a few seconds.
During the remaining time display, if you press the
SLEEP button again, the sleep timer will be canceled.
o This operation is available in every sound source.
28

Wake Up Timer

The unit can be programmed to turn on and standby at a
specified time.
You can set the unit to play an iPod/iPhone, FM/AM radio
or a USB flash memory.
You can also set two separate timers with ALARM 1 and
ALARM 2.

Setting the wake up timer

The procedures below are to set ALARM 1.
Follow similar steps to set ALARM 2.
o This operation is available in every sound source.
1
Press and hold the ALARM 1 button for more
than 2 seconds.
more than 2 sec.
Example:
"ON TIME" appears on the display.
The clock hour value and the wake up timer indicator
( ) blink.
o If no button is pressed for more than 10 seconds, the
wake up timer setting mode will be cancelled.
2
Press the Skip ( . / / ) buttons to set the on
time (hour), and then press the ALARM 1
button.
The minutes value blinks.
Hold down