Alarms And Timers; Setting An Alarm - PURE Contour D1 Handbuch

Alarms and timers

Contour features two alarms and a sleep timer.

Setting an alarm

You can set an alarm to sound a tone, tune to a radio station or play a track from your
iPod/iPhone.
DR
DR
ON
DR
DR
DAILY
DR
DIGITAL
DR
LAST USE
DR
1
SAVED
The 1 and 2 icons on the screen indicate when an alarm is set.
Press the Alarm button on the remote to show the status of Alarm
1, press or to show the status of Alarm 2.
Press the Select button to choose and adjust either alarm and
press or and Select to adjust the following settings:
Alarm on/off
Press or to choose between 'ON' (alarm sounds) or 'OFF'
(alarm does not sound) and press Select.
Time
Set the alarm time. Press
Select. Repeat to set the minutes then press Select.
Days
Set the days that the alarm sounds. Press
between: DAILY (every day), ONCE (no repeat), WEEKENDS or
WEEKDAYS (Monday to Friday) then press Select.
Type
Press or to choose between: DIGITAL, FM, IPOD or TONE
(buzzer).
Station
If you've set alarm mode as DIGITAL or FM, press
choose between: LAST USED (Last station tuned to) or select a
favourite if you have any saved.
Note: NO PRESETS is displayed if you have not created any
favourites.
Volume
Press or to change the alarm volume then press Select.
You see the message 'SAVED' once you have completed all the
alarm settings.
or to adjust the hours then press
or
EN
ES
to choose
or to
13