Peaq PPA500 Bedienungsanleitung Seite 33

ENGLISH
Troubleshooting
No power
iPhone/iPod does not respond
No sound
Distorted sound
No picture
Distorted or noisy picture
Ensure that the wall socket has power by test-
ing with an other device.
Ensure that the supply cord is properly con-
nected to the appliance and wall socket.
Check the docking and iPhone/iPod for ob-
struction on the connectors, then reconnect.
Check if the latest iPhone/iPod software is in-
stalled and make sure the iPhone/iPod works
properly.
Connect an other source to the docking or via
AUX in to test the function.
Ensure that the TV is connected correctly and
displays the correct AV channel.
Ensure that the MUTE function of the appli-
ance, TV or source is not active.
Ensure that the TV is connected correctly and
displays the correct AV channel.
Check if the connection cable is defective.
The iPhone/iPod may be damaged or dirty.
Clean it or try an other one.
Reset the TV's color system.
Ensure that the appliance is connected directly
to the TV (and not via an AV-System, Cable
Box, Satellite Receiver, etc.)
32