Peaq PPA200-B Bedienungsanleitung Seite 31

ENGLISH
Operation
START
Flick the toggle switch on the rear of the unit
to the ON position. The display window will
reveal a dot. Press the red STANDBY button
on the remote control.
STANDBY
To turn the unit back into standby mode,
press the red STANDBY button on the re-
mote. Press STANDBY button once again,
the unit returns to the normal operation
mode, and LED displays the current input
source and volume setting. Alternatively, you
can press the STANDBY button on the key
panel to set to standby mode.
INPUT
The INPUT button on the key panel of the
unit will navigate through the relevant op-
tions.
Alternatively use the remote control by
pressing the iPod or AUX buttons.
VOLUME
Press the VOL +/- button on key panel or
press VOL +/- button on remote control to
adjust the master volume.
Press VOL+ to increase or press VOL- to
decrease the volume.
LED displays the volume level accordingly.
The maximum volume is 40dB, the mini-
mum value is 0dB.
TREBLE
Press the TREBLE +/- on remote control to
adjust the treble.
The adjusting range is ±14dB.
BASS
Press the BASS +/- on the remote control
to adjust the bass of the subwoofer. The ad-
justing range is ±14dB.
RESET
Appliance will be reset to default settings.
30