Memory Preset Stations; Recall Stations From Preset Memories; Clock Time - perfect pro USB BOX Bedienungsanleitung

Memory preset stations

Storing a station in preset memories, please follow steps below.
There are 5 memory presets in this radio.
1. Press the Power button to turn on the radio.
2. Tune to required station as described above.
3. Press and hold the required preset until radio beeps and shows
PX STORED.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories can be over written by following
above procedures.

Recall stations from preset memories

1. Press the Power button to turn on the radio.
2. Press SOURCE button to get FM waveband.
3. Momentarily press the required Preset button, the preset number and
station frequency.
Note:
If the station equips with RDS system and reception quality is good,
LCD display will show station name underneath station frequency
(described later in RDS)

Clock Time

This radio basically has no clock function. However when it tunes to a
radio station with RDS system and reception quality is good, you can
press the INFO button to get clock time and date from the radio station.
It may take a few minutes for the radio to pick up the clock time
information and display it.
11